Step By Step Guide to Adding GPS Trackers to itemit

In your box, you will find: Your GPS tracker and a USB cable. Note: these are no longer supplied with plug heads.

Take the USB cable and remove the rubber flap from the GPS tracker so it hangs free, then insert the micro-USB into the GPS tracker.

Plug in your tracker to begin charging it.

​

Note: GPS Trackers can only be added using the web portal currently.

Open the itemit web portal

In itemit, find the item you want to track with the tracker. If the item doesn’t yet exist, you can add it by pressing “add new item” and adding a name, serial number and, if required, description.

Then click the profile of the item, in the “tags” section, click “+”.

​

Here you need to enter the IMEI number of the tracker.

To find the IMEI number of your tracker, remove the tamper-proof pad, and you’ll find it on the label on the tracker below the barcode.

Enter the IMEI number in the box. Double-check if there are any capitals or numbers. Please do not enter ‘IMEI’ into the box, please only enter the 15 digit number.

Then click “save”.

You’ll then see your GPS tracker screen. It may take a few moments for this screen to update.

Now your tracker has been associated with the item.

First, you’ll want to clean the item you’re attaching the GPS tracker to.

Then, uncover the 3M adhesive stickers on the tamper-proof pad by removing the peel.

Finally, you can stick your GPS tracker to your item.

As standard, your tracker will be set to update every 15 Minutes when an item is moving, and every 60 Minutes when it is stationary.

If you'd like to discuss a different update frequency, contact us at [email protected].

In addition to the scheduled location updates, you can also ask your tracker to tell you where it is at any time.

To do this, go to the item you’re interested in, then click on the GPS icon.

Then click “update”.

​

Your tracker will now give you its live location Note: this can take a few minutes to update.
​